Ergonomic Legacy II Aerobars feature extensions that provide a variety of hand positioning, and width and rotational armrests with a high stack to achieve a relaxed ride position. Ideal for riders that need extra positions for Centuries. - Injected Venturi Armrest and ZB Bracket - Forged 6061-T6 construction with armrest made of injected nylon and glass fiber - Fixed extension adjustment - Extension angle 44 degrees with 58mm rise - Fits both 26.0 and 31.8mm basebars, shims included
Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.
The F40 Armrest was designed in combination with the Aeria Ultimate to offer a massive adjustment range in a simple solution. Creative engineering and design have yielded a strategic offset bolt pattern offering a 67.5mm fore/aft adjustment range at 7.5mm steps between each position and a 92.5mm width adjustment range at 18.5mm steps between each position. Upgrading any of Profile's T+ Carbon Aerobar Systems to the F40 armrest will increase the range of adjustability by 31%, offering 42 unique armrest positions. - Armrest Material: 6061-T6 AL - Armpad Material: EVA Closed Cell Foam - Compatibility: J2/J3/J4/J5/L1/L2/Aeria/Aeria Ultimate - Size: 122mm x 84mm - Stack: 19mm (w/Standard Pad) - Reach Adjustment: 7.5mm Increments - Width Adjustment: 18.5mm - Rotation Adjustment: +/- 7.5 - Weight: 175g
Flip-up armrest leaving the base or drop bar clear for riding with your hands on the flat section of the handlebar. - Construction: 6061-T6 Forged Aluminum - Stack Height: 24mm - Width Adjustment: 37mm - Clamp Diameter: 31.8mm (26.0 w/Shims) - Weight: 242g
The new OneLoc remote provides total control over your RockShox fork at your fingertips. The increased leverage at the bar translates in a smoother and easier actuation. Its countless mounting options (left and right, below or above the bar, tall or standard clamp) make it an ideal companion for SRAM's drivetrain, brakes and RockShox's Reverb remote.
Original equipment rear derailleur pulleys and inner cage for SRAM X01 Eagle rear derailleurs.
- Replacement backplates for MRP chainguides - Medium angle backplate models offer clearance for low chainstay frames such as VPP
- 4, 5, & 6mm stainless steel fastener kit - Includes socket cap screws, flat socket cap screws, flat washers, lockwashers, plain nuts, and locking nuts - 218 Pieces Kit contains: - M4 X 8 Socket Head Cap qty. 8 - M4 X 16 Socket Head Cap qty. 8 - M4 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Socket Head Cap qty. 12 - M5 X 10 Socket Head Cap qty. 12 - M5 x 8 Socket Head Cap qty. 12 - M5 X 16 Socket Head Cap qty. 8 - M5 X 16 Button Socket Head qty. 16 - M5 X 25 Socket Head Cap qty. 4 - M5 X 8 Flat Socket Head Cap qty. 4 - M5 X 12 Flat Socket Head Cap qty. 8 - M5 X 16 Flat Socket Head Cap qty. 8 - M6 X 20 Socket Head Cap qty. 2 - M6 X 35 Socket Head Cap qty. 2 - M6 X 45 Socket Head Cap qty. 2 - M4 Flat Washer qty. 8 - M5 Hex Nut qty. 20 - M5 Nylock Nut qty. 10 - M5 Flat Washer qty. 20 - M5 Lockwasher qty. 20 - M6 Hex Nut qty. 8 - M6 Nylock Hex Nut qty. 6 - M6 Flat Washer qty. 8 - M6 Lockwasher qty. 8
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.The eTAP Powerpack includes a battery charger, cord, transmitter, and international adaptors (US/EU/GB).
This kit contains all the parts needed for scheduled maintenance and/or rebuild of B1 non-Stealth Reverb Seatposts. - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys, and Bushing - Requires RockShox Specialty Tools to perform Service: Post Bleed Tool, Oil Height Tool, IFP Height Tool - B1 posts have a black return speed adjuster on the remote and "ROCKSHOX" laser-etched logos on stanchion by the saddle cradle
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1
- S-bend triathlon bars - Lightweight 6061-T6 alloy - Easy to clean detachable pads - Cable holes make it compatible with bar end shift levers - Internal diameter: 19.6mm - 475 g - With 26.0 and 25.4mm shims
- Replacement backplates for MRP chainguides - Medium angle backplate models offer clearance for low chainstay frames such as VPP
- CNC machined aluminum upper/lower chain guide with high-density composite cages - For use with single front ring and rear cassette - Cartridge bearing lower roller - Choose ISCG or ISCG-05 (ISCG to bottom bracket flanged-cup mount adapter sold separately) - Compatible with 32-38t chainrings
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
- Retrofits all Absolute damping forks (sold by fork year/model) - Separate thumb-operated lock and release buttons - Die-cast alloy body with forged alloy lever
The tool-free Maxle Ultimate Rear brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
Made from forged and machined 6061-T6 Aluminum for high strength and light weight. - Places lever in optimal position left vacant by the lack of front shifters on 1x setups - Matchmaker 1x compatible - Lever pivots on precision bearings for smooth action and durability - 2 mounting positions for ideal placement for each user - Increased leverage ratio for reduced actuation force over universal lever - Textured non-slip thumb pad for not slipping thumbs
$64.95 - $69.95
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
Contains all the parts needed for scheduled maintenance and/or rebuild of Reverb and Reverb Stealth Seatposts. - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Requires RockShox Specialty Tools to perform service: Post Bleed Tool, Oil Height Tool, IFP Height Tool - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys and Bushing - Updated service kit as of 06/2016
$55.00 - $65.00
RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!
The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru axle system.
End cap packs provide a little extra style to your housing end caps and cable tips.
- Provides enhanced chain retention for all 1x drivetrain systems - CNC machined AL6061 alloy mount with dual-compound chain guide - Co-molded composite and TPR guide plates greatly reduce noise from chain contact - Compatible with 28-38T circular and 26-36T oval chainrings - Boost-compatible - Easily adjustable - Mounting hardware included
Utilizing MRP's patented integrated skid, the XCg tucks neatly behind your crankset and protects those costly chainrings from damage. The replaceable nylon skid glides over rocks and obstacles. - Two sizes, 32t and 36t - Great accessory to protect costly chainrings - Integrated skid protects chainrings and glides over rocks and obstacles - 88g (XCg V2 32t, ISCG-05 model)
200 piece assortment of fasteners for wheels Mfg derailleur hangers. Kit includes: - M8 Chainbolt Set (Short) qty. 20 - M8 Chainbolt Set (Long) qty. 5 - M3x8 Flat Head Screw qty. 20 - M3x10 Flat Head Screw qty. 20 - M3x10 Socket Head Cap Screw qty. 20 - M4x8 Flat Head Screw qty. 20 - M4x10 Flat Head Screw qty. 20 - M4x12 Flat Head Screw qty. 10 - M4x14 Flat Head Screw qty. 10 - M5x8 Flat Head Screw qty. 10 - M5x10 Flat Head Screw qty. 10 - M5x10 Socket Head Cap Screw qty. 10
The SRL lever gives riders with 1x drivetrains the option to control their Command Post with lever option that mounts beneath the bar in place of a front shifter. - Command Post lever for the modern 1x drivetrain systems. - Adjustable lever position allows for the perfect set up. - Sealed cartridge bearing pivot for smooth action. - Ideal pull ratio for easy lever activation. - Requires additional mounting hardware (SRAM MatchMaker or equivalent is recommended).
Zipp developed an extensive line of aluminum aerobar extensions to provide the perfect fit for any rider, regardless of size or riding position. The Vuka Alumina Extensions offer three different bends to achieve your ideal fit. - Vuka Alumina Race feature 52mm of rise (175g). The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Vuka Alumina Evo are available with a 70mm (176g) or 110mm (180g) rise. Designed to deliver improved aerodynamics by placing hands closer together and nearer to the rider’s head to start airflow over the rider sooner.
The all new Crank Brothers Highline remote kit. - Universal mounting system: top/bottom & left/right - Single bolt hinge locking system - Infinite spherical adjustment - Compatible with: Highline and other cable-actuated dropper seatposts
Combo kits contain many of the most popular small parts in one convenient package. - Includes a variety of common fittings and seals for a range of disc brakes from Avid, Formula, Magura, Shimano, Hayes and Tektro.
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel. - KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner - Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes - 20 black alloy lined end caps, 10 black POP end caps included
Same specs as the K13-002 Pro Braze-on Chain Catcher but includes a Cadence Magnet required for SRM Power Meters, as well as other leading power meter brands. - CNC Machined 6061-T6 Aluminum - Fitment: All braze-on mounted front derailleurs* - Hardware: Includes all mounting hardware for Shimano, SRAM, and Campagnolo front derailleurs * Not compatible with Campy EPS * May not work with all third-party braze-on adapter clamps - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
• 6061-T6 tubular aluminum construction • Laser etched graphics • Independent arm rest and bar adjustment • Does not include armrests • Cannot mount shifters onto ends • Clamp diameter: 25.4-31.8mm • Extension length: 105mm
• Converts a cassette hub to a single speed • 8 spacers included in various sizes to adjust chain line • Anodized 6061 aluminum • Fits Shimano/SRAM cassette bodies • Conical spacers for increased cog stiffness • Includes single-speed guide, spacers, as well as 18T & 16T cogs
Hope Quick Release Skewer Pair • High quality skewers with stainless steel rods • CNC machined aluminium lever giving a smooth positive feel • Total weight=115g
$29.99 - $57.99
• Machined aluminum mounting arm • Delrin (engineering grade thermoplastic) chain guide body • Adjustable design • Fits 32T to 38T chainrings • Compatible with 1x drivetrain systems • Clamp mount: 31.8-34.9mm • Weight: 75g (BB Mount), 88g (clamp mount), 80g (Mini)
$27.99 - $56.99
Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized
The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system.
The OPT remote allows instant engagement of Cane Creek's Climb Switch on Double Barrel rear shocks, giving the rider precise control of traction and climbing feel. - Hard anodized for durability - Requires brake cable and housing for installation - Bottom mount for below bar engagement or top mount for above bar - Compatible with DBinline, DBAir IL, and DBCoil IL shocks only
The Problem Solvers Chain Tensioner is a handy device when you're building a singlespeed bike and need to remove slack in the chain and keep it running smoothly. It's made of light and durable CNC-machined 6061 aluminum with steel hardware and has efficient, long-lasting nylon pulleys. It simply screws onto your frame's derailleur hanger. It even lets you adjust your chainline, too.
$31.99 - $54.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake. - Made from CNC Machined T6061 Aluminum - Anodized Black - No additional hardware needed ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters
Remote rebuild kit for A1 generation Reverb and Reverb Stealth Posts. - Plunger, Button, Boot, and O-Rings - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
Replacement Enduro 6806/29 ABEC-3 sealed bearings for Wheels Mfg DUB Compatible bottom brackets. - Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Imported - Sold as Bag of 2
$3.50 - $51.50
- Replacement Rotor Bolt kits for Formula rotors - 6/pack
Shimano Chainring Bolts - For use with FC-6800 46t outer chainring - Color: Black - Length: 10 mm - Material: Aluminum - Type: Torx
Brake lever blades are easy to bend or break, but their sacrifice saves the more expensive parts of your brake system, which is a good thing! Shimano Hydraulic Disc Brake Lever Blades can be used on either the left or right lever, and these are for XTR 9020 brakes.
- Brass cam bushing offers smooth lever action and secure clamping force - CNC machined aluminum collar and lever with 6mm bolt
$30.00 - $50.00
Replacement swing plates for Alternator 1.0 dropouts.
Specialized's S50 aluminum extensions allow for a low aggressive aero position or a high-leverage position for climbing. Their 22.2mm outer diameter is compatible with many standard aftermarket aerobar clamps, and at 400mm long, they can be cut to fit your specific reach.
Turn your geared bike into a singlespeed machine with Surly's Singleator. The Singleator mounts to your derailleur hanger and provides a smooth, quiet and adjustable means of tensioning the excess chain slack on any bike. It's made from strong forged steel and features a triple-sealed spring, large-cog capacity, chain guides, fully-adjustable chain line, floating pulley, and a stainless-steel pivot bushing. And, it works with both BMX and standard chains.
Bontrager's Speed Concept Seatpost Cap lets you get your position dialed for your next triathlon or time trial. Two different saddle offsets and widely a adjustable saddle angle means you'll find the perfect fit for your race against the clock.
$26.49 - $49.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.2 connects Shimano I-Spec A/B brake to I-Spec II Shifter. - Made from CNC Machined T6061 Aluminum - Anodized Black - Includes all necessary hardware for both I-Spec A and I-Spec B brake - No additional hardware needed
Made from forged and machined 6061-T6 Aluminum for high strength and light weight. - Places lever in optimal position left vacant by the lack of front shifters on 1x setups - Matchmaker 1x compatible - Lever pivots on precision bearings for smooth action and durability - 2 mounting positions for ideal placement for each user - Textured non-slip thumb pad
RockShox Reverb Internals
Inner Seal Head Assembly for servicing A1 and A2 generation Reverb and Reverb Stealth dropper seatposts. - Seals the upper tube from the inner shaft as it cycles - Fits A1 (2010-2012) and A2 (2013-2016) generation Stealth seatposts - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - New as of 06/14
Main Piston and Poppet kit for A2 generation internally routed RockShox Reverb Stealth seatposts. - For "A2" designated posts, 2013-2016: Will not work for A1 posts - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle.
$24.00 - $49.00
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure
- Cable stop for front centerpull and cantilever brakes - Integrated barrel adjuster for cable tension. 26G - Made in USA