Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Bontrager Pro 4mm Inline Cable Tension Adjuster
$15.99
- Install this in line to your shift housing for precise tension adjustments - Compatible with all 4mm shift housing - Allows for 3.5mm of adjustability - Indexed movement prevents any accidental or unintentional adjustments - Compact design only adds 14mm to housing length
Bontrager Rotary Head Seatpost Saddle Clamps
$16.99
Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands
Bontrager Drop Line Universal Dropper Lever
$24.99
Key features: - Cable actuated remote lever for the Bontrager Drop Line dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Under Bar Lever is designed to ergonomically replace the left shifter on 1x drivetrains - Universal Lever is compatible with 1x, 2x, 3x drivetrains and left or right hand placement - Use with: Drop Line Seatpost
Bontrager Rear Mount Adjustable Kickstand
$24.99
Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware
Bontrager Speed Concept Seatpost Cap
$49.99
Bontrager's Speed Concept Seatpost Cap lets you get your position dialed for your next triathlon or time trial. Two different saddle offsets and widely a adjustable saddle angle means you'll find the perfect fit for your race against the clock.
Bontrager Race Lite Clip-On Aerobars S-Bend
$119.99
In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.
Campagnolo Disk Brake Mineral Oil
$15.00 - $27.00
Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Will not damage frame finishes - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin
Campagnolo EPS Power Cable for Charger - US Standard
$20.00
- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries
Campagnolo EPS V3 Power Unit Seatpost Mount
$20.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Fits external seat post diameters from 30.9 - 31.6mm - Not compatible with the V2 Power Unit
Campagnolo H11 Disc Caliper Mounting Screws
$20.00
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
Campagnolo EPS V3 Power Unit Water Bottle Mount
$35.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - For mounting the V3 power inside the seat tube using the water bottle screws - Not compatible with the V2 Power Unit
Campagnolo EPS Cable Guide Magnet
$70.00
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
Cane Creek 10-Series Interlok Headset Spacer
$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Cane Creek Thudbuster LT Elastomer
$7.50
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Cane Creek Shock Spring Converter Clip
$7.75
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
Cane Creek DB Volume Reduction Spacer Kit
$9.00
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
Cane Creek IS47-IS41 Head Tube Converter
$9.00
Allows the lower of a 47mm IS headtube to be converted to use a standard 41mm 36x45 degree headset bearing.
Cane Creek Thudbuster ST Elastomer
$9.00
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
Cane Creek 40-Series Headset Top Cover
$14.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height: 9mm
Cane Creek Thud Glove
$18.00
Cane Creek's Thud Glove protects the moving parts of your Thud Buster seatpost from dirt and weather. Available in both short- and long-travel models.
Cane Creek Rear Shock Hardware
$19.50 - $26.50
Mounting hardware fits a variety of Cane Creek shocks.
Cane Creek Hellbender Headset Bearing
$24.00 - $49.00
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Cane Creek 110-Series Headset Top Cover
$30.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height = 9mm
Cane Creek 3G Thudbuster Rebuild Parts and Tool Kit
$39.00
Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost. - Rebuild bushing tools - LT arm screws (M4 x 20mm) - Saddle clamp bolt (M5 x 35mm) - Saddle clamp spherical washers - Saddle clamp adjustment knob
Cane Creek Helm Coil Spring
$40.00
Replacement springs for Cane Creek Helm suspension forks.
Cane Creek Slamset Headset Top
$49.00
Slamset top headsets are designed to keep the stack height low. - Hellbender bearings with improved seal structure
Cane Creek OPT Climb Switch Handlebar Remote
$54.99
The OPT remote allows instant engagement of Cane Creek's Climb Switch on Double Barrel rear shocks, giving the rider precise control of traction and climbing feel. - Hard anodized for durability - Requires brake cable and housing for installation - Bottom mount for below bar engagement or top mount for above bar - Compatible with DBinline, DBAir IL, and DBCoil IL shocks only
Cane Creek VALT Spring
$130.00
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
Cannondale Eileen 2 Rear-Mount Kickstand
$22.00
• Designed for flat-sided tubes up to 23mm thick • Firm spring prevents movement while riding • Two bracket options to better fit small and large frames
Cannondale Eileen 3 Rear-Mount Kickstand
$22.00
• Telescoping leg that offers expanded versatility to fit a wide range of bicycles • Crafted of lightweight and durable aluminum alloy • Equipped with a firm spring that prevents movement while riding • Includes a retro adapter plate