Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

RockShox Reverb Brass Post Keys
$4.00
A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)
Shimano Deore XT M8000 Rear Derailleur Cable Anchor Assembly
$4.00
Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10
Black Ops Modder
$4.19
- Allows the use of two separate cables running from detangler to brake for more precise adjustment and better feel - Attaches to rear cable guide and routes two cables around seat post
Sunlite BB Washer ISIS
$4.39
- Fits Shimano and ISIS BBs - 16mm ID x 20mm OD x 1.5mm Thick - Bag of 10
Sunlite Seat Binder Bolt Cromo
$4.79
- Binder bolt - M6 x 45mm chromoly bolt - 13mm CNC alloy nut - Length: 45mm
Sunlite Specialty BB Axle Bolt
$4.79
- Large Flange-Fits Splined MX Cranks - Sold in pairs
FSA BB30 Inner Snap Ring Set
$4.99
Snap rings are pretty ingenious, except they love to launch in an impossible-to-track direction when removing or installing. Maybe you should keep a spare set of these BB30 Inner Snap Rings, just in case.
FSA BB30 Wave Spring Washer
$4.99
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.
Planet Bike Handlebar END Plugs
$4.99
Expandable 3mm hex bolt mounting plugs Keep your handlebar tape in place with these expandable bar end plugs to give a safe and protective finish for your bars. - Designed to fit standard diameter handlebars with an inner diameter of 18-25mm - Clean and protective finish for road and mountain bike handlebars - Easy to install with included 3mm hex wrench - Weight: 20 grams
SRAM PowerLock Link Chain Connector
$4.99
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
Salsa Alternator 2.0 Hardware Kit
$4.99 - $5.99
Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates
Sunlite Cantilever Boss
$4.99
- Standard replacement cantilever/v-brake bosses
Sunlite Handlebar Shims
$4.99
- Alloy construction - Great for Cruiser or BMX bar conversions
Problem Solvers 1-inch Headset Spacers
$5.00 - $20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm
RockShox Reverb Hose Strain Relief
$5.00
Strain relief for servicing RockShox Reverb hydraulic lines. - Fits all generations of Reverb
SRAM Power Link Chain Connector
$5.00
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
Shimano Dura-Ace R9100 Rear Derailleur Cable Anchor Assembly
$5.00
Keep the cable fixed securely in your Dura-Ace R9100 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
Shimano XTR M9000 Rear Derailleur Cable Anchor Assembly
$5.00
Keep the cable fixed securely in your XTR M9000 rear derailleur with this Shimano Rear Derailleur Cable Anchor Assembly
SRAM PowerLock Eagle Chain Connector 12-Speed
$5.25
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
Origin8 Chain Deflector
$5.39
- Anti chain-suck device - Allows the front derailleur to be adjusted for strong downshifts - If not using front derailleur the device can act as a chain guide
Wheels Manufacturing Inc. Chainstay Protector
$5.50
Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.
Wheels Manufacturing Inc. Ball Bearing Retainer
$5.95 - $17.00
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wippermann Chain Connectors
$5.95 - $13.95
- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains
Bontrager Universal Chainstay Protector
$5.99 - $15.99
- Quiets chain slap and protects chainstays from nicks and scratches - Standard protector fits most chainstays - Universal kits come with circle protectors to eliminate frame damage due to cable rub
FSA Pedal Washers
$5.99
Stainless steel pedal washers - Sold in pairs
Origin8 Revolvr Fat Bike Center Sleeve
$5.99
- Machined AL6061 alloy construction - Center sleeve for use with Revolvr outboard bottom brackets - Converts 68/73mm outboard bottom bracket to a 100mm or 120mm fat bike model - Seals and protects the bearings from harmful contaminants - Center sleeve only: Revolvr outboard bottom brackets sold separately
Origin8 Rust Buster Master Link
$5.99
Connecting links for Origin8 chains - Enviromentally friendly coating passes 1000 hour salt spray test
SRAM Flat Mount Disc Caliper Bracket Bolts
$5.99 - $23.99
Flat Mount Disc Caliper Bracket Bolts
Salsa Alternator Flat Mount Hardware Kit
$5.99
Replacement hardware kit for Salsa Alternator Flat Mount dropouts. - For use only on frames designed for the Alternator Flat Mount standard